19
P.N. 28-0558/04
G. WHITE WHEEL SHROUD (PELLET ICE)
G. BLACK WHEEL SHROUD (CUBED ICE)
H. Using the cleaning solution described in the “Cleaning and Sanitizing Solutions” section and a
clean cloth or soft brush, clean all removable parts, sides of ice bin, ice chute and surface of
aluminum casting.
I.
Using hot water, rinse the cleaning solution thoroughly.
J.
Wearing sanitary gloves, soak a clean cloth towel in sanitizing solution, described in the
“Cleaning and Sanitizing Solutions” section above, and wash all surfaces of removable parts,
sides of ice bin, ice chute liner, and surface of aluminum casting.
K. Wearing sanitary gloves, reassemble all removable parts. Ensure agitator clip is locked.
L.
Fill the unit with ice and replace the top cover.
M. Reconnect power to the dispenser.
Remove the gasket which secures the shroud by
pulling it out.
Push the front section of the shroud back.
Pull the shroud up and out.
Remove the lower ice chute assembly.
Remove the dispensing wheel shroud.
Remove the lower ice chute assembly.
