Lance 1130 Owner'S Manual Download Page 18

Page: 18 / 132

WARNING

Risk of fire.

Connect only to source of correct voltage.

Do not overload electrical circuits.

Do not use an extension cord to connect to
shore power.

Replace fuses with like rating.

Propane Fuel System

DANGER

You can die or be brain damaged by Carbon
Monoxide.

Make certain the exhaust from propane
appliances is directed to the outdoors.

Have a working carbon monoxide detector
in the accommodation spaces of your trailer
before operating any propane gas appliance.

Do not operate portable grills, portable
stoves, portable lanterns or portable heaters
inside the trailer.

WARNING

Risk of death due to fire or explosion.

Do not connect a propane gas system to a
supply of natural gas.

Extinguish all pilot lights and turn off all
appliances and igniters before refilling fuel
or propane gas tanks.

Do not fill propane gas tanks to more than
80- percent of capacity.

Do not fill the tank with any gas other than
propane.

Do not store propane gas tanks inside the
trailer.

WARNING

Risk of fire or explosion

• If propane gas is detected (by smell or by

the propane gas detector):

• Do not touch electrical switches

• Extinguish flames and pilot lights

• Open doors for ventilation

• Shut off propane gas supply at the propane

tank

• Leave the area until odor clears

Correct the source of propane gas leakage
before using propane appliances.

Do not use a flame to locate the source of a
propane gas leak.

WARNING

It is not safe to use cooking appliances for
comfort heating.

Cooking appliances need fresh air for safe
operation.

Before operation:

• Turn on exhaust hood

• Open window

Failure to comply could result in death or
serious injury.

Summary of Contents for 1130





































































































































Search results

Summary of Contents for 1130

Reviews:

Related manuals for 1130

Brands by name

Popular brands

Lance 1130, Owner'S Manual

Search results

Summary of Contents for 1130

Reviews:

Related manuals for 1130

Brands by name

Popular brands