background image

-4-

Safety information: XL 8

8 m Telescopic Lance Series

Warning:

3.1. During transport ensure equipment is stored in protective carry case. 

3.2. Do not operate the appliance when other people are in the workspace.

3.3. Store equipment and chemicals in a safe place, with end- caps and plugs in place, away from children and 

animals. 

3.4. When the lance is passed onto third parties, it must be accompanied by the operating instructions.

3.5.  Please  observe  during  operation,  that  the  application  of  pesticides/  insecticides  is  accordance  with  any      

statutory protection acts. 

3.6. Use of the lance against or during strong wind may cause damage.

Application:

2.1. The equipment can be used to spray the industry recognised insecticides, pesticides, weed killers and liquid 

fertilizers, as used in the home, in the garden, on the farm, or in vineyards. Do not use oils. 

Safety Guidelines:

4.1. Make sure that the product you wish to apply is suitable for this equipment. The data safety and handling         

instructions  provided  by  the  chemical  manufacturer  must  be  noted  and  observed.  The  use  of  chemicals  is               

entirely at the user’s own risk. Should you have any doubts in this respect please contact the distributor where 

you purchased your product. 

4.2. The lance must not be used with oil substances, caustic substances (e.g. disinfectants or impregnating liquids 

which attack the skin or materials), corrosive substances (acids) or highly flammable or combustible substances. 

4.3. Before each use, check to ensure that the lance has been correctly assembled, and that it is in a functional 

and undamaged condition. Damaged parts must never be used. 

4.4. To the knowledge of the producer, at the time of manufacturing the unit, the approved pesticide/ insecticide 

will cause no damage to the materials used to create the appliance. 

Safety Regulations:

1.1. Please read the instruction manual carefully before operating this equipment for the first time. 

1.2. Please observe the safety and warning regulations! 

1.3. Failure to observe these regulations will exempt the manufacturer of all liability. 

1.4. Keep the operating instructions in a safe place. 

1.5. Failure to comply with the safety instructions and warnings can lead to serious injury or death of persons. 

Lance Lab Ltd

C2 Strangford Park

Ards Business Centre

Jubilee Road

Newtownards

BT23 4YH

United Kingdom

T: (0)28 9181 8313

E: [email protected]

W: www.lancelab.com

Summary of Contents for 8 m Telescopic Lance Series

















Reviews: