-11-
Maintenance Instructions: XL 8
8 m Telescopic Lance Series
1. To replace pole sections remove
the rubber foot from the XL 8 with
a pulling and twisting motion or
simply cut off with a knife. Replace
the required section then re-attach
the rubber foot by pushing firmly into
place. (a new rubber foot is supplied
with each section).
7. Retract the flexi - tip and
re-attach the push fit connector
to the flexi-tip tubing and refit
the dust plug.
For detailed videos on
the maintenance process
see www.lancelab.com.
8. Insert the top section (7)
back into the lance.
Replacing a damaged lance section:
When ordering a replacement lance
section they are referenced 1 - 7,
with section 1 being the handle
section (thickest) and section 7
being the tip (yellow tip section).
Lance Lab Ltd
™
C2 Strangford Park
Ards Business Centre
Jubilee Road
Newtownards
BT23 4YH
United Kingdom
T: (0)28 9181 8313
W: www.lancelab.com
