background image

Lance Lab Ltd™ ∙ C2 Strangford Business Park ∙ Ards Business Centre

Jubilee Road ∙ Newtownards ∙ County Down ∙ BT23 4YH ∙ United Kingdom

www.lancelab.com

Operating Manual: XL 8

8 m Telescopic Lance Series

(14.02.15)

Telescopic Lance with 8m Working Height!

TM

READ  MANUAL BEFORE USE.

Specification:

•     7 sections, 7.1m lance + tubing kit (8m)

•     A compact 1.3m tough carriage case.

•     25cm flexi tip is easily bent to the 

       required angle.

•     10cm high viz yellow sight tip.

•     A Spray Nozzle Kit is available for 

       Liquid Spraying. 

Description:

•     Allows precision dusting at height.

•     Lance has a working height of 1.5m to 8m.

•     Reduces treatment time.

•     Reduces the need for access equipment. 

•     Reduces the risk of injury from using       

       ladders. 

 

XL 8 D

Telescopic Lance with 8m working height!

UK & Ireland Distributors for XL 8 Lances 

Lance Lab Ltd™

 

C2 Strangford Park 

Ards Business Centre 

Jubilee Road, Newtownards 

County Down, BT23 4YH

www.lancelab.com  

028 9181 8313

Bendable Flexi Nozzle

Attaches to DR 5

Flat fan liquid nozzle.

(Sold separately).

Cone spray liquid nozzle.

(Sold separately).

DR 5 dusting.

Attaches  to  DR  5  and  Birchmeier 

sprayers.

Summary of Contents for 8 m Telescopic Lance Series

















Reviews: