Lancair International Inc., Represented by Neico Aviation Inc., Copyright 2008 Redmond, OR 97756
Chapter 1
Page 1.7
REV. 2nd Ed./08-15-06
Introduction to the Lancair ES FastBuild Kit
ES
1.4.D Making a Useful Jack Stand
The jack stand is ideal for lifting the wings and a number of
other tasks including checking the weight and balance. In
addition the ES fuselage bottom may have optional
jackpoints.
Steps...
1. Cut two pieces of plywood, one 8”x 8” and the other 4”x
4”.
2. Glue the two pieces of plywood together with the 4”x 4”
centered on the larger piece.
3. Drill a 1” deep and 3/8” diameter hole in the center of the
4”x 4” piece.
4. Install the JP-325 jack point in the hole.
5. Glue soft padding on the top of the 8” x 8” piece of
plywood.
6. Insert the Jack port on the jack stand.
Figure 1.4.D.1 Jack stand
