1
On/Off
2
“Auto” mode
3
“Shiatsu” function
4
“Rolling” function
5
“Heating” function
6
Vibrating seat
7
Massage head
spacing*
8
Full back massage
9
Upper back massage
10
Lower back massage
11
Targeted massage
2
8
10
11
9
1
3
4
5
6
7
HOW TO USE
1) Details :
4 massage heads
‘shiatsu’ & ‘rolling’ massage
Adjustable massage head spacing
1 ‘auto’ mode
3 massage areas (entire back, upper back and lower back)
1 “targeted massage” function
Vibrating seat
“Heating” function
Retractable fl ex on the side of the chair
2) Description of the OFFICE MASSAGE CHAIR :
Control device:
* only for the “rolling” function.
USING OF THE OFFICE MASSAGE CHAIR
The OFFICE MASSAGE CHAIR has a retractable fl ex located on the right site of the chair.
Plug this into a power socket. Once connected to the power socket, the OFFICE MASSAGE CHAIR is ready for use.
On/Off :
Starting or stopping the appliance is controlled by simply pressing the red button (diagram, point 1).
Back:
Automatic mode
(diagram, point 2):
This mode consists of a sequence of diff erent massages. This function is valuable since it off ers a varied massage.
Manual mode:
• You have the option of choosing between two types of massage: 'shiatsu' (diagram, point 3) and 'rolling' (diagram, point 4)
for which you may choose to adjust the massage head spacing (diagram, point 7).
• You also have the option to select the location of your massage:
a) Targeted massage, precise location (diagram, point 11).
b) Your lower back (diagram, point 10).
c) Your upper back (diagram, point 9).
d) Entire back (diagram, point 8).
• The 'heating' function can be switched on at any time (diagram, point 5).
Warning:
You may not feel the heat through clothing such as a jumper or jacket.
Seat:
• You also have the benefi t of a vibrating seat that you can choose to enable or not (diagram, point 6).
MAINTENANCE
Storage
•
Put the OFFICE MASSAGE CHAIR in a dry place.
•
Avoid it coming into contact with sharp edges and other pointed objects which might cut or pierce the surface.
•
To prevent the fl ex from breaking, do not move the armchair by pulling on it.
Cleaning
•
Unplug the massaging offi ce armchair at the power socket and wait a few minutes before cleaning it.
•
Clean it with a soft, slightly damp sponge.
•
Never let water or any other liquid come into contact with the chair.
•
Never use abrasive detergents, brushes or a thinning agent to clean it.
WASTE MANAGEMENT
•
All the packaging is composed of materials that pose no hazard for the environment and which can be disposed of at your local sorting
centre to be used as secondary raw materials. The cardboard may be disposed of in a paper recycling bin. The packaging fi lm must be
taken to your local sorting and recycling centre.
•
When you have fi nished using the device, please dispose of it in an environmentally friendly way and in accordance with the law.
LIMITED WARRANTY
LANAFORM® guarantees this product against any material or manufacturing defect for a period of two years from the date of purchase, except
in the circumstances described below.
The LANAFORM® guarantee does not cover damage caused as a result of normal wear to this product. In addition, the guarantee covering
this LANAFORM® product does not cover damage caused by abusive or inappropriate or incorrect use, accidents, the use of unauthorized
accessories, changes made to the product or any other circumstance, of whatever sort, that is outside LANAFORM®’s control.
LANAFORM® may not be held liable for any type of circumstantial, indirect or specifi c damage.
All implicit guarantees relating to the suitability of the product are limited to a period of two years from the initial date of purchase as long as a
copy of the proof of purchase can be supplied.
On receipt, LANAFORM® will repair or replace your appliance at its discretion and will return it to you. The guarantee is only valid through
LANAFORM®’s Service Centre®. Any attempt to maintain this product by a person other than LANAFORM®’s Service Centre will render this
guarantee void.
5
4
Office Massage Chair
EN
EN
Lanaform Massage Handleiding.indd 4-5
4/07/11 10:40
