15
5 Repair and Maintenance
5
Repair and Maintenance
WARNING!
The device must not be repaired, modified or manipulated. Otherwise the safety integrity can
be lost and LAMTEC will not guarantee for the proper operation any more.
NOTICE
Defects and failures must be reported to LAMTEC as soon as possible, including type, version
and serial number of the device.
In case of a repair or maintenance, comply with instructions from the installation manual.
Defective devices must be sent to LAMTEC for a repair. The safe operation of the application
must be ensured while the device is being repaired or a maintenance is ongoing. After a repair
or a maintenance, follow chapter
3 Installation and Commissioning
again.
WARNING!
Replace the device only by one of the same type and version and check the corresponding
data and parameter set.
DANGER!
The flame detector is a safety device. Any repair work or other changes to the device shall
only be carried out by the manufacturer's specialist staff or by some other persons appointed
by the manufacturer. Any other persons are not allowed to operate on parts inside the device.
In particular, this concerns the unauthorized exchange of the flame contact fuse. Any unau-
thorized replacement, repair or modification of the device can lead to a loss of the safety
integrity.
Summary of Contents for F200K2 IR-1
