6
1.4. Removing the packaging
Remove the plastic wrapping and corner padding from around the product. Check that the heat pump has not suffered
any damage during transportation. If the heat pump is found to be damaged, the company which delivered the product
must be immediately notified.
Also check the contents of the delivery immediately. Your delivery should include 2 x flexible pipes, an outdoor sensor
and a room sensor (latter item optional). Please ensure that you notify us within 5 days if all the additional equipment
specified in the order confirmation is not included in the delivery.
1.5. Structure and operating principles
1.5.1. Structure
The Lämpöässä geothermal heat system consists of a network of heat collection pipes, a geothermal fluid mixture
circulating within the network and a geothermal heat pump unit. The geothermal heat pump unit consists of an
integrated water tank, compressor, evaporator, condenser and a refrigerant circulating inside the pump. The heat col-
lection fluid in the ground loop and the refrigerant do not mix at any stage of the process.
1.5.2. Operation
The Lämpöässä heat pump transfers heat from the ground, water system or
a bore well. Of the total thermal energy required for heating, Lämpöässä
collects more than 70% from natural sources. Less than 30% of the electri-
cal energy is required for the collection of thermal energy. This energy is used
to run the various components in the system.
Earth
3/4
Evaporating
Condensing
Compressor
Electricity
1/4
Heat 4/4
dhw
Ground source
heat pump
The heat collection pipe is a plastic pipe (PEM 40/10) with a water and ethyl alcohol or glycol-water mixture circulating
inside. It is placed 1-1.2 metres deep in the ground or at least 3 metres deep in water. The bore well is normally 100-
200 metres deep with a diameter of 140-165 mm. The heat pump is used in the transfer of heat from the water and
ethyl alcohol mixture. Approximately three degrees of heat is transferred into the refrigerant circulating inside the heat
pump, after which the geothermal fluid returns to the ground loop to heat up again.
Heat is transferred from one fluid to another in the evaporator, in which the refrigerant evaporates thanks to the low
suction head of the compressor. This binds the heat from the geothermal fluid with the help of a disk thermal exchan-
ger. The pressure of the gaseous refrigerant is increased using a compressor which makes the temperature of the refri-
gerant rise. The heat contained in the gas is transported in the condenser to heat the water in the water tank and thus
produce hot water for use. As the heat is transferred, the gas turns into fluid once again and is carried back through a
dehumidification filter and an expansion valve to circulate.
The Lämpöässä geothermal heat pump is suitable for producing hot water and heating single-family households, ter-
raced houses, offices, hotels and industrial halls. Heat distribution can be implemented using floor heating with circu-
lating water, water-filled radiators or the circulation of hot air. Floor heating has the best operating efficiency.
In order to ensure trouble-free operation, all Lämpöässä heat pumps have been test-run, set up and tested by the
manufacturer.
