6
補足1
How to remove door
補足2
When Vertical Frame is not Used
When vertical frame is not used, use the door stopper
⑨
and bumper block
⑪
on the track and on the floor.
Fasten the door stopper at the location where the door will stop.
Fix the bumper block to both the upper track ends, then adjust it to the position where the door closes.
Trailing edge
Leading edge
⑪
Bumper block
:FD30-HBB
⑪
Bumper block
:FD30-HBB
⑨
Door stopper (floor)
:FD30-HTKY
⑨
Door stopper (floor)
:FD30-HTKY
10 or more
10 or more
Be careful not to let the door fall.
Caution
The soft closer or the upper roller may be damaged if door stopper and
bumper block are not installed.
Caution
Use a 10 mm support under the door.
Then pull out the upper roller main unit from the door while raising
the lever
.
It will be easier if you slide the hanger bolt with a spanner wrench.
Spanner wrench
Release
lever
Appendix 1
Appendix 2
