3
3
Verification Before Installing Soft Closer
Trigger catcher
(Red colored part)
Correct set position
Correct set position
Improper set position
4
Inserting Parts into Upper Track
Insert the parts in order from
❶
to
❷
with care of direction.
5
Mounting of Upper Track
(Recommended screw: Countersunk head tapping screw 3.5
×
20)
wrong
screw
loose
inclined
over-
tightened
deeper
grove
OK
6
Fastening Trigger
【
1
】
Mounting position
Door width - 297 (299)
※
3
Trigger
(black)
Trailing edge
※
3
( )
When cover cap
⑧
is used.
Without verification the self closing feature may fail.
Caution
If the trigger position is wrong, pull back the trigger
catcher to the correct position using a 6 mm diameter
round bar.
Remove any dust or aluminum chips from the upper track.
Tape around rollers and upper track to prevent the inserted
parts from falling.
Caution
【
2
】
How to use the mounting jig
Trigger mounting hole
③
Trigger (Black)
Trigger tip protrudes
90°
90°
[Assembled state]
1
.
Align the trigger and jig
with the mounting hole.
2
.
Install trigger.
3
.
Remove the jig.
④
Jig
Incomplate.
Out of straight.
Correct installation
OK
Be careful not to overtighten the screws
and screw heads protruding on upper track.
It may cause deformation of track or
damage of soft closer.
Caution
Trigger catcher
(Red colored part)
φ
6
②
Soft closer (two-way)
⑤
Upper roller
①
Upper track
Trailing edge
Leading edge
❶
❷
VIDEO
LINK
