background image

Warranty

LaMotte Company warrants this instrument to be free of defects in parts
and workmanship for one year from date of shipment (a six month
limited warranty applies on electrodes and cables). If it should become
necessary to return the instrument for service during or beyond the
warranty period, contact our Technical Service Department at (800)
344-3100 for a return authorization or visit our website at
www.lamotte.com. The sender is responsible for shipping charges,
freight, insurance and proper packaging to prevent damage in transit.
This warranty does not apply to defects resulting from action of the user
such as misuse, improper wiring, operation outside of specification,
improper maintenance or repair, or unauthorized modification. LaMotte
Company specifically disclaims any implied warranties or
merchantability or fitness for a specific purpose and will not be liable for
any direct, indirect, incidental or consequential damages. LaMotte
Company’s total liability is limited to repair or replacement of the
product. The warranty set forth above is inclusive and no other
warranty, whether written or oral, is expressed or implied.

15

Summary of Contents for POCKETESTER EC/TDS/SAL TRACER

















Reviews: