9.
Stir the filtrate with the electrode to create a homogeneous solution.
10.
Gently stir the filtrate with the electrode. Read the TDS value of
the filtrate from the display.
11.
Rinse the electrode in distilled water. Replace the cap.
Storing Readings
1.
After the reading is displayed press and hold the
MODE/HOLD button to store the current
reading. The meter will enter the HOLD mode
and HOLD will be displayed. The storage
location number will be displayed on the lower
display followed by the reading being stored.
2.
Press the MODE/HOLD button to exit the
HOLD mode and return to normal operation.
3.
If an attempt is made to store more than 15
readings, the stored readings will be overwritten
starting with the first reading.
Recalling Stored Readings
NOTE:
First ensure that the HOLD symbol is not displayed. If it is, exit
the HOLD function by pressing the MODE/HOLD button.
1.
Press the CAL button once and then press the MODE/HOLD
button immediately after CAL is displayed; the location number (1
through 15) will briefly appear and then the value stored in that
location will appear. The displayed units will flash, indicating that
the storage recall mode is active.
2.
The last stored reading taken will be displayed first. To advance to
the previously stored readings, press the MODE/HOLD button. The
location number is displayed first, followed by the reading stored in
that location.
3.
To exit the storage mode, press the CAL button and the
TRACER will return to normal operation.
11
