TESTING
Getting Started
1.
Twist off the battery compartment cap to access the battery tab.
Remove the plastic tab before first use.
2.
Remove the cap from the bottom of the TRACER to expose the
electrode.
Changing the Measurement Function
The meter can be set to measure Conductivity, TDS (ppm), TDS
(mg/L) or Salinity. To change the mode:
1.
Turn the TRACER on.
2.
Press and hold the MODE/HOLD button for 3 seconds. The display
will begin to scroll through the units.
m
S or mS (Conductivity)
ppm or ppt (TDS)
mg/L or g/L (TDS)
ppm or ppt (Salinity “S”)
NOTE: 1 part per thousand (ppt) equals 1000 parts per million (ppm).
Example: 3.1 ppt = 3,100 ppm
3.
Release the MODE/HOLD key when the desired mode is displayed.
9
