background image

7

Exclusive to Howdens

Warning and Safety information

• Only a little moisture is removed from the 

vapours in the convection air mode. This is 

why a sufficient supply of fresh air must always 

be provided, e.g. by opening the window or 

using domestic ventilation systems.

• Always make sure that the indoor climate is 

normal and comfortable (45 - 60 % humidity).

• Switch the hob extractor down to a lower 

setting for around 20 minutes or activate 

the automatic delayed pause function 

every time the hob extractor is used in the 

convection air mode.

  Children and general safety

Electrical products can be dangerous to 

children. Keep children away from the product 

when it is operating and do not allow them to 

play with or near the product.
The packaging materials will be dangerous 

for children. Keep the packaging materials 

away from children. Please dispose of all parts 

of the packaging according to environmental 
standards.

  Safety when working with electricity

In case of any damage, switch OFF the 

product and disconnect it from the mains. To 

do this, turn OFF the fuse at the fuse box.
Make sure that fuse rating is compatible with 

the product.

  

Electrical connection

 This appliance must be earthed.

 The electrical connection must comply with  

current local and national safety regulations  

(BS 7671 in the UK).

 

Do not 

connect the appliance to the mains 

electricity by an extension lead or multi-

adapter.

 The appliance must not be used with 

energy-saving plug devices. The appliance 

will not function correctly and may overheat.

 Check that the appliance is working 

correctly.

 The appliance is constructed in accordance 

with the relevant safety regulations.

 Connecting the appliances to the mains 

and repairing and servicing the appliances 

may only be carried out by a qualified 

electrician according to currently-valid 

safety regulations.

 For your own safety, 

do not

 allow anyone 

other than a qualified service technician to 

install, service or repair the product.

 If the mains supply cable of this appliance 

is damaged, it must be replaced by the 

manufacturer, the Customer Service of the 

manufacturer or by another qualified person 

to avoid danger.

 The appliance may not be operated with 

an external timer or an external telecontrol 

system.

  Waste Electrical and Electronic 

Equipment (WEEE)

This product bears classification 

symbol for waste electrical and 

electronic equipment (WEEE). This 

product has been manufactured 

with high quality parts and materials 

which can be reused and are suitable for 

recycling. Do not dispose of the waste product 

with normal domestic and other wastes at the 

end of its service life. Take it to the collection 

centre for the recycling of electrical and 

electronic equipment. Please consult your 

local authorities to learn about these collection 

centres.
This appliance complies with all relevant safety 

standards.

Summary of Contents for LAM9550













































Reviews: