35
Exclusive to Howdens
Remove c.122mm (140-18), the height
of the support panel) from centre upright.
5
Fit back panel supports to cabinet sides
2 x 560mm
1 x 440mm
30mm
30mm
The cut down pieces of rail are used to hold
the back panel in place.
114mm
30mm Wood screw
(not supplied)
Don’t cover the gap that has been cut for the ducting.
Remove c.122mm (140-18), the height
of the support panel) from centre upright.
4
Remove and cut down back rail
Avoid metal tangs on wider cabinets.
Support panel
Insert batten at the
back of the cabinet
to support worktop.
Remove back rail and split into 3 long
sections shown below.
Summary of Contents for LAM9550
Page 2: ...2 www howdens com...
Page 43: ...43 Exclusive to Howdens...