46
47
www.howdens.com
Built-in Single Split Cavity Oven
LAM3676
Instructions and Installation
• The appliance may be
connected to the mains
supply only by a suitably
qualified person.
• The mains lead must not be
clamped, bent, trapped, or
come into contact with hot
parts of the appliance.
• If the mains lead is damaged,
it must be replaced by a
qualified person (mains cable
must not be longer than 2m
for safety reasons). It should
be routed away from the
appliance and not trapped
between the appliance and
the wall.
Your oven comes prefitted with
a mains cable. If you need to
change it:
1. Open the terminal block cover
with screwdriver.
2. Pass the mains lead under the
cable clamp and secure clamp
with the screw over the outer
cable insulation.
3. Connect the cables according
to the supplied diagram.
4. Close the cover of the
terminal block once the
wiring is complete.
5. Mains cable must not be longer
than 2 metres for safety reasons.
6. The mains lead should
be routed away from the
appliance and not be trapped
between the appliance and
the wall.
Installation
Slide the oven into the cabinet
aperture, align and secure.
Fix your oven with 4 screws
and retainers.
Final check
Connect the appliance to the
mains supply, switch on
the mains supply and check
the oven’s functions.
BLUE
(Neutral)
BROWN
(Live)
GREEN
(Earth)
Cable clamp
Cooling fan
1
Fan
2
Control panel
3
Door
The Built-in cooling fan cools
both the front of the appliance
and cabinetry.
Do not switch the oven off
at the mains isolation switch
immediately after cooking.
Cooling fan continues to
run for up to 20-30 minutes
(approx.) even after the oven
control is turned off.
1
2
3
