8. Touch to set the desired temperature,
When the desired value is reached, touch to
confirm the temperature.
9. Touch once for cooking time. will flash on
the display.
10. Touch the to set the desired cooking
time and confirm the . Once the cooking
time is set, will be displayed continuously.
11. Put your dish into the oven and close the door.
12. If cooking function, temperature and time
values are suitable, touch for 2 seconds to
start cooking,. Cooking will start and will
appear on the display.
Your oven will readily start operating in the
selected function and will increase the inner
temperature to the set temperature. It will
maintain this temperature until the end of the
set cooking time. Each grade of the inner
temperature symbol will be lit as inner
temperature reaches to the set temperature.
Additional active heaters and recommended tray
position appear in the Function display.
All segments of the inner oven temperature
symbol will turn on when the oven reaches the
set temperature.
13. After the cooking is completed, and will
flash on the display and an alarm signal will be
heard.
14. To stop the alarm signal, just touch any key.
The oven will switch off automatically.
15.If you want the oven to continue operating,
press for 2 seconds. The oven will continue
cooking for an indefinite period of time.
If you want to cancel the setting after performing
the cooking setting by adjusting the cooking time
you will need to reset the cooking time. You can
also switch off the oven by touching if you
want. Setting the end of cooking time to a later
time; You can ensure that the oven runs and turns
off automatically by setting temperature and
operating function specific to your meal, the
cooking time and end of cooking to a later time,
manually controlling without setting the cooking time.
Oven returns to stand-by display after it is powered
on for the first time and the current time is set. Only
the current time appears on the display.
1.Place the middle section plate in its housing found
between the 3rd and 4th rack guides.
If the middle section plate is not placed, the oven
timer will operate as a whole single section.
2. Switch on the oven touching the key for two
seconds.
3. When the oven is switched on, the first function
special to the top section cooking will be displayed.
Touch once to activate the bottom section of
oven. will appear next to the active oven section.
Temperature setting and cooking process initiation
steps for both bottom and top oven sections will
iterate in the same way. (In the images, the bottom
oven is shown as selected).
Each time you touch the bottom section only, both
bottom and top sections and the top section only will
be activated respectively.
5. Touch to enter the display for setting the
operating function.
The relevant function number will flash on the
display.
6. Touch to set the desired operating function.
7. If you want to change the temperature, touch
once to reach the temperature display. symbol will
flash on the display.
8. Touch to set the desired temperature.
When the desired value is reached, touch to
confirm temperature.
9. Touch once for cooking time. will flash on
the display.
LAMONA
Appliances
Page _ 19
www.howdens.com