LAMONA
Appliances
Page _ 17
www.howdens.com
5. Touch to set the desired operating
function.
6. To change the temperature, touch once to
reach the temperature display. symbol
will flash on the display.
7. Touch to set the desired temperature.
When the desired value is reached, touch
to confirm temperature.
8. For Booster (Rapid Heating), touch for
approximately 3 seconds until appears on the
display. will appear and the booster setting
will be activated.
When the booster setting is made, the oven
operates in maximum power to reach the set
temperature. When the set temperature is reached
will disappear. Booster setting is active for the
functions during which is displayed when
is touched for a long time. Booster can only be
activated for cooking operations performed in
the single large section.
9. Touch once for cooking time. will flash on
the display.
10. Touch to set the desired cooking time
and confirm the setting by touching . Once
the cooking time is set, and will remain lit
on the display.
11. Touch twice at short intervals for the end
of cooking time. will flash on the display.
12. Touch to set the desired end of cooking
time and confirm the setting by touching .
Once the end of cooking time is set, will be
displayed continuously.
13. Put your dish into the oven and close the door.
14. If cooking function, temperature, time and end
time values are suitable, touch for 2 seconds to
start cooking.
will appear on the display. Oven timer automatically
calculates the startup time for cooking by deducting
the cooking time from the end of cooking time you
have set. When the cooking startup time comes, the
selected cooking function will be activated, will
disappear and the oven will heat up to the set
temperature. It will maintain this temperature until
the end of the set cooking time. Each grade of the
inner temperature symbol will be lit as inner
temperature reaches to the set temperature.
Additional active heaters and recommended tray
position appear in function display. The oven lamp
is lit during the cooking process.
All segments of the inner oven temperature symbol
will turn on when the oven reaches the set
temperature.
15. After the cooking is completed, and will
flash on the display and an alarm signal will sound.
16. To stop the alarm signal, just touch any key.
The oven will switch off automatically.
17. If you want the oven to continue operating,
press for 2 seconds. The oven will continue
cooking for an indefinite period of time.
If you want to cancel the programme after
performing the cooking setting by adjusting the
cooking time, you will need to reset the cooking time.
You can also switch off the oven by touching if
you want.
Using the oven only as the top or bottom section
Manual cooking by selecting temperature and
operating function
During manual operation, the oven will operate
regardlerss of the cooking time after the function
and temperature selection is made. The oven will
not switch off automatically at the end of the
cooking time. Cooking should be ended by the
user. Oven returns to stand-by display after it is
powered on for the first time and the current time
is set. Only the current time appears on the display.
1. Place the middle section plate in its housing
found between the 3rd and 4th rack guides.
If the middle section plate is not placed, the oven
timer will operate as a whole single section.
