
14. If cooking function, temperature, time and end
time values are suitable, touch for 2 seconds to
start cooking.
will appear on the display. Oven timer automatically
calculates the startup time for cooking by deducting
the cooking time from the end of cooking time you
have set. When the cooking startup time comes, the
selected cooking function will be activated, will
disappear and the oven will heat up to the set
temperature. It will maintain this temperature until
the end of the set cooking time. Each grade of the
inner temperature symbol will be lit as inner
temperature reaches to the set temperature.
Additional active heaters and recommended tray
position appear in function display. The oven lamp
is lit during the cooking process.
All segments of the inner oven temperature symbol
will turn on when the oven reaches the set
temperature.
15. After the cooking is completed, and will
flash on the display and an alarm signal will sound.
16. To stop the alarm signal, just touch any key.
The oven will switch off automatically.
17. If you want the oven to continue operating,
press for 2 seconds. The oven will continue
cooking for an indefinite period of time.
If you want to cancel the programme after
performing the cooking setting by adjusting the
cooking time, you will need to reset the cooking time.
You can also switch off the oven by touching if
you want.
Using the oven only as the top or bottom section
Manual cooking by selecting temperature and
operating function
During manual operation, the oven will operate
regardlerss of the cooking time after the function
and temperature selection is made. The oven will
not switch off automatically at the end of the
cooking time. Cooking should be ended by the
user. Oven returns to stand-by display after it is
powered on for the first time and the current time
is set. Only the current time appears on the display.
1. Place the middle section plate in its housing
found between the 3rd and 4th rack guides.
If the middle section plate is not placed, the oven
timer will operate as a whole single section.
example, this is useful when you want to turn food
in the oven at a certain point of time. Alarm clock
will give a signal once the time you set is over.
Maximum alarm time can be 23 hours and 59
minutes.
To set the alarm:
1. Touch at short intervals until appears on
the display. will start flashing.
2. Touch to set the desired time and confirm
the setting by touching . Once the alarm time is
set, will be displayed continuously.
3. Alarm will be given after the alarm time has
elapsed.
4. You can stop the alarm by touching any key.
To cancel the alarm:
1. Touch key at short intervals until appears on
the display.
2. Touch until
"00:00"
appears on the display and
confirm the setting by touching .
Alarm will be cancelled and symbol will disappear.
Sound setting
Sound can only be set when the oven is on stand-by
display.
1. Touch key at short intervals until appears on
the display. will flash on the display.
2. There are 2 sound types, namely
"1"
and
"2"
.
Touch to select the desired type.
3. Touch to confirm the setting.
It returns to the stand-by display. Only the current
time appears on the display.
Current time setting
Current time can only be set when the oven is
switched off. If you want to change the time that
was set during initial setup:
1. Touch key at short intervals until appears
on the display. Hour field and will symbol flash
on the display.
2. Use to set the hour field.
3. Touch to confirm the setting.
4. Minute field and symbol will flash. Set the
minute with keys. Touch to confirm the
minute.
It returns to the stand-by display. Only the current
time appears on the display.
WARNING:
Close oven door during grilling.
Hot surfaces may cause burns!
Grilling can be made in single whole section,
only top section or in the top section when bottom
-top sections are operated.
Grilling in single large section
Oven returns to stand-by display after it is powered
on for the first time and the current time is set.
Only the current time appears on the display.
1. Remove the middle section plate from the oven.
Only after the middle section plate is removed the
oven timer will work in single large section cooking
setting.
2. Switch on the oven touching for two seconds.
3. When the oven is switched on, the first function
peculiar to the single large section cooking will be
displayed.
4.Touch to enter the display for setting the
operating function.
The relevant function number will flash on the
display.
5. Touch to select the desired grill function.
6. After the function is selected "Temperature",
"Rapid Heating (Booster)", "Cooking time" and
"Cooking end time" can be set. see. (Operating
the oven as a single section).
7. If cooking function, temperature and time
values are suitable, touch key to start cooking.
Cooking starts.
8. If the cooking time is set, the oven will
automatically switch off at the end of this time.
Two audible signals will be heard. If no cooking
time is set, touch again to end the cooking
when the cooking process is complete.
9. Touch key to switch off the oven.
Grilling in top section only mode
Oven returns to stand-by display after it is powered
on for the first time and the current time is set.
Only the current time appears on the display.
1. Place the middle section plate in its housing
LAMONA
Appliances
Page _ 23
www.howdens.com
How to operate the grill