The inner glass panels of the door can be removed
for cleaning.
When cleaning, avoid the use any harsh
abrasive chemicals or sharp metal scrapers as this
could scratch the surface and damage the glass.
Please be aware when removing and
cleaning the glass that the door has the potiential
to spring closed.
We recommend you support the door at all times or
remove the entire door assembly prior to attempting
to clean it.
In order to do this:
1. Open the door fully.
2. The top plastic cap can be pulled away from the
retaining clips.
4. To replace the glass follow this process in reverse
ensuring the printed surface of the glass is facing
downwards.
Ensure the glass is fully located in the lower
retaining slots before attempting to re-fit the top cap.
Hot surfaces may cause burns
Make sure that the appliance is switched off and
cooled down in order to avoid the risk of an electric
shock or burns.
The oven lamp is a special lamp that can
resist up to 300ºC. (See technical specifications)
Removing the inner door glass
Replacing the oven lamp
3. The upper glass can be slid out of its
retaining slots and the inner glass can
be removed.
3. If your oven lamp is of type (A) shown in the
figure below, remove it by rotating as shown
and replace it. If it is of type (B), pull and
remove it as shown in the figure and replace it.
www.howdens.com
Page _ 31
If your oven is equipped with a round lamp:
1. Disconnect the oven from the mains.
2. Turn the glass cover counter clockwise to remove
it.
4. Install the glass cover.
