5.8 Sealing with Silicone
Apply the silicone into
the gap between each
panel, and between panels
and overhead cabinets/
benchtops; ensuring that
sufficient silicone is used to
completely fill the gap, with
a small amount of excess
silicone squeezing out of
the join.
5.9 Clean-up
Use water with a small
amount of detergent and
a soft micro-fibre cloth to
clean up any excess silicone
from the decorated surface
before it cures.
5.10 Care and Maintenance
Laminex Metaline splashbacks require very little maintenance if installed according
to the instructions above and cleaned according to the following guidelines:
• DO use a soft micro-fibre cloth with a mild detergent
• DO clean the surface regularly
• DO NOT allow food stuffs to build up on the surface
• DO NOT use abrasive cleaners or pot scrubbing pads
• DO NOT use cleaning solutions that are highly acidic or caustic
• DO NOT clean the surface if it is hot
• DO NOT place metallic or sharp implements against the surface, which may
cause scratching