10. Trouble Shooting Guide
Problem
Cause
Solution
Machine has no power or rollers
are not rolling
-Power cord is not properly
plugged in
-Power switch is off
-Check that the power cord is
properly plugged in
-Check that the power switch is
turned on or contact support
Excessive noise
-Operation of gears is not
smooth
-Turn off the machine, and
contact support
Bad lamination
-Laminated
document
is
wrinkled, damp, or folded
Adjust temperature lower or
higher and/ or adjust speed
No increase of temperature
-Check the power plug
-Check that the power plug and
switch is turned on or contact
support
Frequent curling of film
-The temperature may be too hot -Lower the temperature
Edge of document is not sealed
-Document is too thick to seal
the edges of the film
-Use a thinner document or leave
more
space
around
the
edges(approx. 5mm)
Emergency state
-Something may be stuck
between the heated rollers or
they are out of position
-Turn off the switch and contact
support.
11. After Sales Service Information
www.LaminationDepot.com
1601 Alton Pkwy Suite E
Irvine, CA 92606-4843
Contact us at 800-925-0054
[email protected]
WARRANTY
Lamination Depot warrants the TL-600 against any defects for 12 months from the date of original purchase. Warranty does not cover
normal wear and tear, nor damage caused by operator error or misuse. Should any defect appear within 12 month warranty from date of
purchase we will gladly repair or replace the machine. To start a warranty claim within 12 months from date of purchase please contact our
customer service team by calling (800) 925-0054 or by email
.
To process your warranty claim, the machine must be returned in its complete original packaging to avoid incidental damages in transit by
the carrier of your choice. Lamination Depot does not cover shipping costs for claims nor is responsible for any damages caused by the
carrier.