background image

 

 

1. Specifications   

 

 

Model 

TL-600 

Max. Laminating Width 

13" (330mm) 

Max. Laminating Thickness 

1.5mm 

Max. Pouch Thickness 

14mil (350mic) 

Laminating Speed 

19"-78"/min 

Operating Temp 

176°F -302°F 

Heating System 

4 Heated Rollers 

Qty of Roller 

Roller Diameter 

30mm 

Preheating Time 

4mins 

Auto Sleep Mode 

Yes 

Machine Body 

Metal 

Power Supply 

AC110,120, 220, 240V/50,60Hz 

Power Consumption 

1050W 

Dimensions 

21.25"W x 10.5"D x 5"H 

Weight 

33.95 lbs 

 

2. Electrical Safeguards

 

! warning 

1) Do not operate with a damaged power supply cord or plug, after a malfunction, or after it has been 
damaged in any manner. 
2) Unplug the pouch laminator before moving it, or when it is not in use for an extended period of time. 
3) Do not overload electrical outlets beyond their capacity as this can result in fire or electrical shock. 
4) The pouch laminator must be connected to a supply voltage corresponding to the electrical rating of the 
machine as indicated. 
5) Do not alter attached plug. The plug is configured for the appropriate electrical supply. 
6) Keep hands dry while operating the machine. 
7) The machine is intended for indoor use only. 

 
 

3. Safety Precaution 

! warning 

1) Use/store the laminator in a clean and dry environment, and keep away from flammable/combustible 

Summary of Contents for TL-600








Reviews: