Lambrecht EOLOS-IND, Manual, Page: 9 / 13

Manual
Weather Sensor EOLOS-IND Modbus
(1643) EOLOS-IND Modbus Manual
6.5 Measured Value and Parameter Register
The register range 30001 to 35000 of the Lambrecht sensors is intended for measured values.
The following measured values are provided by the EOLOS sensor.
Register
address Parameter Name Unit Factor Description
30001 Wind speed instantaneous value m/s 10 1 decimal place INT
30002 Wind speed mean value since last retrieval m/s 10 1 decimal place INT
30003 Wind speed maximum value m/s 10 1 decimal place INT
30004 Wind speed minimum value m/s 10 1 decimal place INT
30201 Wind direction instantaneous value ° 10 1 decimal place INT
30202 Wind direction mean value since last retrieval ° 10 1 decimal place INT
30203 Wind direction maximum value ° 10 1 decimal place INT
30204 Wind direction minimum value 10 1 decimal place INT
30401 Air temperature instantaneous value °C 10 1 decimal place INT
30402 Air temperature mean value since last retrieval °C 10 1 decimal place INT
30403 Air temperature maximum value °C 10 1 decimal place INT
30404 Air temperature minimum value °C 10 1 decimal place INT
30601 Humidity instantaneous value % r.h. 10 1 decimal place INT
30602 Humidity mean value since last retrieval % r.h. 10 1 decimal place INT
30603 Humidity maximum value % r.h. 10 1 decimal place INT
30604 Humidity minimum value % r.h. 10 1 decimal place INT
30701 Dew point instantaneous value °C 10 1 decimal place INT
30702 Dew point mean value since last retrieval °C 10 1 decimal place INT
30703 Dew point maximum value °C 10 1 decimal place INT
30704 Dew point minimum value °C 10 1 decimal place INT
30801 Air pressure instantaneous value hPa 10 1 decimal place INT
30802 Air pressure mean value since last retrieval hPa 10 1 decimal place INT
30803 Air pressure maximum value hPa 10 1 decimal place INT
30804 Air pressure minimum value hPa 10 1 decimal place INT
The registers addresses 30001 to 35000 apply to all LAMBRECHT meteo Modbus sensors, but are only available or valid if
the respective sensor supports the corresponding values. (e.g. a pure wind sensor does not provide any air humidity).
As error code or invalid value the LAMBRECHT sensors return 0xD8F1 (0xFF676981).
Note: For each measurement type, the values from the registers with the maximum values (3XXX3) and minimum values
(3XXX4) are automatically reset as soon as the register with the mean values (3XXX2) has been read out. For example, reading
30402 resets registers 30403 and 30404.
9