LAMBORGHINI R7.190 DCR, Workshop Manual

Page: 7 / 41

VII
ConTEnTs
30.3.48 - Removal and refitting of the oil pressure switch 30-252
30.3.49 - Fitting and removing the fuel pressure regulator valve 30-254
30.3.50 - Removing and fitting the coolant pump (driven by toothed belt) 30-256
30.3.51 - Testing the thermostat (after removal) 30-267
30.3.52 - Removal and refitting of the thermostat 30-269
30.3.53 - Fitting and removing the thermostat housing 30-270
30.3.54 - Removing and refitting the torsional vibration damper (toothed belt drive) 30-273
30.3.55 - Removing and fitting the V-belt, V-belt pulley 30-273
30.3.56 - Removal and refitting of the flywheel 30-287
30.4 - C0 - Engine accessories 30-290
30.4.1 - Disassembly and assembly of the speed indicator (crankshaft) 30-290
30.4.2 - Removal and refitting of the camshaft speed sensor 30-294
30.4.3 - Removal and refitting of the exhaust manifold 30-296
30.4.4 - Fitting and removing the solenoid valve (exhaust gas recovery module) 30-298
30.4.5 - Removal and refitting of the fuel filter head. 30-300
30.4.6 - Removal and refitting of the rail pressure sensor 30-305
30.4.7 - Assembly and disassembly of the temperature sender 30-306
30.4.8 - Removal and refitting of the engine wiring loom 30-308
30.4.9 - Removal and refitting of the alternator (with drivebelt) 30-318
30.4.10 - Disassembly and assembly of the starter 30-323
30.4.11 - Removal and refitting of the supply air pressure/temperature sender 30-324
30.5 - D0 - Transmission 30-326
30.5.1 - Complete hydraulic shuttle assembly 30-326
30.5.2 - Shuttle and HML assembly 30-330
30.5.3 - Changing the transmission oil 30-340
30.5.4 - Clutch control assembly 30-342
30.5.5 - Disassembly of the clutch control assembly 30-343
30.5.6 - H clutch assembly 30-346
30.5.7 - Disassembly of the H clutch assembly 30-347
30.5.8 - Slow-medium gear clutch pack 30-352
30.5.9 - Slow/medium epicyclic gear unit 30-356
30.5.10 - Powershift control valve 30-360
30.5.11 - Disassembly of powershift control valve 30-362
30.5.12 - Secondary shaft 30-366
30.5.13 - Primary shaft 30-379
30.5.14 - Rear PTO drive shaft and pumps assembly 30-389
30.5.15 - Front gearbox 30-393
30.5.16 - View of front gearbox from rear 30-393
30.5.17 - Rear gearbox removal 30-396
30.5.18 - Front gearbox cover 30-397
30.5.19 - Range gear control cover 30-400
30.5.20 - Lower gearbox cover 30-401
30.5.21 - Range reduction unit control unit 30-402
30.5.22 - Disassembly of the range reduction unit control assembly 30-404
30.5.23 - Range gear and creeper selector assembly 30-407
30.5.24 - Adjusting the bearings preload 30-415
30.5.25 - Range driving gear 30-417
30.5.26 - Disassembly of the range driving gear 30-420
Find manuals at https://best-manuals.com