AGORA
MODELS
38
1
3
2
4
Take the support pins and locate the two smaller holes on the
carburettor (arrows), found between the three larger holes.
Fully insert the support pins into the two smaller holes of the
carburettor as shown.
Press the manifolds with two recesses into place, so that the golden
pins of the carburettor (circled) sit in the recesses. The curve of the
manifolds should lead in the same direction as the previous stage
(arrows).
Stage 15: Right Carburettor (2)
Take the three inlet manifolds. One of them has only one recess
(middle photo).
The others have two recesses (outer photos): these two are
interchangeable for the following step.
