AGORA
MODELS
21
3
4
Press the manifolds with two recesses into place on the carburettor
as shown, so that the golden pins of the carburettor (circled) sit in the
recesses. The curve of the manifolds should lead towards the same
side as the golden part (arrow).
Note: You can also check photo 10 for reference.
Stage 11: Left Carburettor (1)
1
2
Locate the two smaller holes on the carburettor (arrows), found
between the three larger holes.
Insert the two support pins into the two smaller holes of the
carburettor as shown.
Take the three inlet manifolds. One of them has only one recess
(middle photo).
The others have two recesses (outer photos): these two are
interchangeable for the following step.
