AGORA
MODELS
35
5
6
Now install the manifold with one recess by fitting it onto the middle
as shown. The recess houses the protruding golden pin (circled).
Stage 14: Right Carburettor (1)
7
8
Fit the three shims onto the ends of the manifolds so that the nuts
(circled) face toward the carburettor as shown.
Take the three shim plates. Note the D-shaped hole (inset) that
corresponds with the D-shaped pins at the end of the manifolds.
Next push the velocity stacks into the larger holes in the carburettor,
as you did before.
Take care to hold the stacks by the outer edge and
not the grill to avoid damaging the part.
Tip: Rotating the stacks as you insert them helps with fitting in place.
