AGORA
MODELS
22
5
6
Now install the manifold with one recess by fitting it onto the middle
as shown. The recess houses the protruding golden pin (inset).
Take the three shim plates. Note the D-shaped hole (inset) that
corresponds with the D-shaped pins at the end of the manifolds.
Stage 11: Left Carburettor (1)
7
8
Fit the three shims onto the ends of the manifolds so that the nuts
(circled) face toward the carburettor as shown.
Next push one of the velocity stacks into a larger hole in the
carburettor.
Take care to hold the stack by the outer edge and not
the grill to avoid damaging the part.
Tip: Rotating the stack as you insert it helps with fitting it in place.
