LAMBERTI ELEKTRONIK DFW HZR, Operating And Commissioning Manual, Page: 7 / 16

P
a
g
e
7
11. Functions and adjustments
11.1. Basic information about the menu navigation
With only four keys you can adjust your heating controller or your heating system. With the keys you can get
from the starting menu (an example is shown on the previous page) into every submenu to see the desired
values of the heating system or to change them. Please consider, that values can only be changed at the
remote control, if these values or dates are enabled for changing by the manufacturer. The display lightening
is switched on automatically, if a key is pressed for the first time. The lightening is switched off 30 seconds
after the last key has been pressed.
Attention!
The adjustments at the digital remote control have always priority to the adjustments at the heating
controller!
Please also consider the operating and the commissioning manual of the heating controller for all
works and adjustments at your digital remote control.
!
Basically:
the key acknowledges your choice
(change of an operating mode, move to a sub-
menu, save a changed value)
the key deletes your choice (manual
switchover, leave a submenu, delete an entered
value)
the keys and choose a submenu
and change values of your heating system. To
open the heating specialist level (operating level
3) press the key and for 5 sec-
onds.
11.2. Move to a submenu
The following submenus are available:
AE – Setpoint values
i – Information
CH – Switching times
Display of time and weekday
Display of date (DD.MM.YY)
To move from the starting display to a submenu, press the key or until the desired submenu is
displayed. Acknowledge your choice with the key .
OK
esc
+
+
–
–
+
–
OK
Functions and adjustments