
P
a
g
e
4
3.
Safety advices
The remote control corresponds to the appropriate safety regulations.
DANGER
Danger to life due to electric shock!
Only trained, competent and authorised persons (electrical technician according to DIN VDE
1000-10 and BGV A3) are allowed to do mounting, electrical installation and commissioning,
maintenance and repair work at the remote control!
Follow all local regulations of the responsible energy service providers!
Ensure that the power supply is switched off and that the remote control cannot be switched on
before starting installation or repair work on electrical equipment.
Never work on current conducting parts!
!
Attention!
Never bring easily inflammable materials near to the remote control!
Protect the remote control against humidity, coldness, heat, dust and strong sunlight!
The remote control may be damaged, even if it falls down of a low height!
The remote control is only allowed to be operated in perfect technical condition. Damages, that
affect safety or the proper functioning of the remote control, have to be removed at once by com-
petent and authorised persons!
4.
Warranty and liability
All regulations about warranty and liability are defined in the general terms and conditions of the manufacturer
or in the particular contractual relationship. Warranty and liability claims are generally excluded in these cases:
if damages result of inappropriate use of the remote control
if the housing had been opened unauthorised, unauthorised structural modifications or adjustments on the
controller software had been implemented
if the electrical technician had executed mounting or repair work improperly
if safety advices or instructions of the operating or the commissioning manual had been ignored
5.
Location of the manual
This operating and commissioning manual has to be handed out to the technician before mounting work is
started. It has to be stored in readable condition near to the remote control in order to ensure quick access if
needed.
6.
Transport and storage
Prove carefully, if there are damages at the packaging or at the remote control.
Only transport the remote control in the original packaging.
The remote control may be damaged, even if it falls down of a low height.
Avoid hits or shocks and extreme temperatures during transport and storage (below 0 °C, above
+ 50 °C).
The remote control may only be storaged in the original packaging and in dry surrounding areas.
Safety advices
Summary of Contents for DFW HZR
Page 1: ...Page 1 OPERATING AND COMMISSIONING MANUAL...
Page 15: ...Page 15 Notes...