LAMBERTI ELEKTRONIK DFW HZR, Operating And Commissioning Manual, Page: 11 / 16

P
a
g
e
1
1
14. Manual change temperature level heating
With this function you can manually change the temperature level in the automatic operating modes until the
next switching time.
You can manually change the temperature level of your heating (e.g. when you are not at home on a
Sunday). In this case your heating will run according to the (lower) setpoint values night.
If you come home earlier from work, you can directly switch to the setpoint values day and do not have
to wait for the next switching time. When the next switching time starts, the manual adjustment is
reset.
e.g.
Move with the key to the submenu and switch with or to automatic ( Auto ) or to the
desired day-, night- or economy level. The symbol heating ( ) appears in the display and the vertical
cursor flashes. Acknowledge your choice with the key .
Adjustment temperature
level Symbol Meaning
Manual choice of the
automatic temperature
regulation To cancel manual changes, switch to the automatic mode in the
submenu (display ”Auto“).
Manual change to tem-
perature regulation: day In this mode you leave the automatic temperature regulation of
the heating according to the given adjustments. The controller
runs with the setpoint values day until the next switching time
that is stored in the controller. The cursor below the symbol of
the adjusted operating mode flashes.
Manual change to tem-
perature regulation: econ-
omy level In this mode you leave the automatic temperature regulation of
the heating according to the given adjustments. The controller
runs with the setpoint values economy level until the next
switching time that is stored in the controller. The cursor below
the symbol of the adjusted operating mode flashes.
Manual change to tem-
perature regulation: night In this mode you leave the automatic temperature regulation of
the heating according to the given adjustments. The controller
runs with the setpoint values night until the next switching time
that is stored in the controller. The cursor below the symbol of
the adjusted operating mode flashes.
15. Manual hot water loading
With this function you can manually reload the hot water storage tank, that means, you get hot water in times,
when your heating and your hot water support are normally switched off. You manually change the tempera-
ture level of the hot water until the next switching time or until the hot water loading is finished.
Move to the submenu by pressing the key two times. With the keys or choose automatic
(Auto) or the desired day-, night- or economy level. The symbol hot water circuit ( ) appears in the display
and the vertical cursor flashes. Acknowledge your choice with the key .
Manual change temperature level heating
esc
+
OK
--
Auto
+
OK
esc
--