26
having reached the exact temperature
(thermocontrol).
G -
Extracting the basket inclines and shakes it
carefully. So the rest of the water drops will be
eliminated.
Leave the dishes in the basket until its will be dry
by evaporation. Take the dishes away from the
basket and pay attention not to touch the dishes
on its border and put the on clean shelves.
To continue carry a new basket, introduce it in
the machine, close the door and press button
“C”.
It is possible to interrupt the washing cycle at any time
simply pushing again
button
“B”.
Self-washing cycle
(OPTIONAL)
: Push the
button
“F” for 3 seconds
with closed door : self-
washing cycle is starting with 3 complete loading
and draining tank. Alternatively are flashing the 3
control lamp .
ACHIEVEMENTS
Any deficiency in the washing process is
apparent when dirty residuals are visible. Any
halos might be caused by an insuffucuent
rinsing: in this case, check that the rinsing jets
are clean and there is a sufficient pressure in
the water distribution network.
In the case that residuals are present, check
that:
• the washing jets are clean
• there is detergent
• the positions of the objects in the rack are
correct.
DISHES POSITIONING
It is suitable to place dishes, inside the plastic
basket with the concave side facing upwards.
Place mixed cutlery in a vertical position into the
suitable container minding not to cram them and
with handgrips towards the bottom (see
drawing).
DRAIN PUMP INSTRUCTION
The drain pump starts up automatically just
during the washing cycle
to discharge the
exceeding water coming from the rinsing cycle.
At the end of the working day, in order to
completely discharge the tank,
it is necessary
to perform the following operations:
1. Open the door of the dishwasher
2 Afterwards push button
“F” for 3 seconds.
Alternatively are flashing the control lamp “
E
” and
the cycle lamp (chosen before)
The discharge will stop automatically after 1
minute. The control lamp “
E
” will flash slowly.
3. Disconnect the machine with pushbutton "A";
Please note: in case the door is open the control
lamp “E” will continue flashing.
If after 2 minutes the machine doesn't finish the
discharge, a signal of discharge alert ( lamp E
flashes fast) indicates a failure of the same :
contact a qualified technician.
