Lamax Electronics W10.1, User Manual

Page: 6 / 81

5
B
CONNECT THE CAMERA TO A POWER SOURCE
›
You can charge the camera by either connecting it to your computer or using an optional AC adapter.
›
It takes approximately 4.5 hours to charge the battery from 0 to 100%. When charged, the charge indi-
cator turns off.
Note: Charging the battery from 0 to 80% takes 2.5 hours.
5. VIDEO MODE SETTINGS
Video resolution The resolution and FPS (frames per second) settings at which the camera
will record.
Loop recording When enabled, the video is divided into time segments based on the
selected settings.
Audio Sets whether the camera records audio.
Encoding Video codec selection.
LDC Fisheye reduction.
Stabilization MAXsmooth stabilization on/off, available in all resolutions at a maximum
of 60 FPS. When stabilized, the field of view (FOV) is smaller and can
negatively affect video quality in low-light conditions. It cannot be
combined with the fisheye correction feature.
Metering Sets how the exposure is metered. There are three modes („Center“,
„Average“ and „Spot“) to choose from.
›
Center – For shooting objects that will mainly be in the middle of
the shot.
›
Average – The camera obtains light information from the entire sce-
ne and sets average values.
›
Spot – This setting allows you to meter a small portion of the scene,
the default setting is centre. The user can use the touchscreen to
select a different point from which the camera will determine the
exposure.
Exposure Exposure compensation setting. A higher value means a lighter video, a
lower value means a darker video.
Shutter Select the shutter speed.
ISO ISO settings. Setting the ISO value determines its sensitivity to light.
AWB Adjusts the white balance for different scene lighting.
Scene mode Preset modes for different types of scenes.
Sharpness Adjusts the sharpness of the video.
Grid Displays a grid on the screen for better composition.
Filter Selects the video filter.