Lakes fully reversible Single Panel Bathscreen for fitting
left or right handed to suitable bathtub.
Ensure bath rim is level & that bath / wall (tile) joints are sealed & cured
over entire length of bath sides (See Fig A) prior to fitting screen.
DO NOT SEAL BATH EDGES UPTO A FITTED SCREEN !
Dia 8mm
Tile / Masonry
Drill Bit
Dia 2,8mm
HSS Drill Bit
Pencil
Screwdriver (Pozi Drive)
Spirit Level (with vertical ‘bubble’)
Tools Required
Good quality Silicone
Sealant & applicator
Tape
Measure
Standard Size
SS20 / SS22
SS40 / SS44
SS60 / SS66
Adjustment (A)
975 to 1000mm
1175 to 1200mm
945 to 970mm
A
A
Measure & mark wall rail position.
Mark fixing hole positions, drill, plug & affix wall rail.
(Back face of Wall profile may be siliconed before mounting).
Wall rail orientation : Cross holes to inside (curved face outermost).
10
mm
to
centr
e
of
wall
rail
Wall
/ Bath
Joint
W
all
/W
all
Joint
For best performance, screen
must be positioned adjacent to the inner edge of the
bath rim to ensure effectiveness of the bottom
seal / drip strip.
Ensure continuous silicone sealant bead as indicated
before fitting wall rail.
dia 5 x 60 lg
The use of good quality silicone sealant
& cleaning / degreasing of all joint areas is recommended.
Dia 3mm
HSS Drill Bit
