![background image](http://html1.mh-extra.com/html/lake/lm-series/lm-series_operation-manual_3338088018.webp)
12
Signal Flow and Lake Processing
Lake LM Series Operation Manual Rev 1.3.5
Figure 5-2: LM Series Signal Flow (Mesa Mode)
Please refer to section 6.10.4.2 for information on changing the Frame configuration between Contour and
Mesa Modes.
5.2 Level Adjustments & Mute Points
The numbers below correspond the points identified inFigure 5-1 and Figure 5-2.
Input Router Stage
- Input selection and MUTE
Input Mixer Stage
- Router ON/OFF connection to mixer and gain settings
Module Input Stage
- Mute (N/A for LM Series Mesa Mode) and gain settings
Module Output Stage
- Mute and gain settings
Output Router Stage
- Output ON/OFF routing connections
In Contour Mode, a Module can be connected to Input Routers 1-4 providing all five stages of mute/connec-
tivity functionality via the front panel interface or the Lake Controller; Input Routers 5-8 allow stage 1 input
selection only (MUTE unavailable), along with stage 5 output ON/OFF routing connections (i.e. pass-thru).