Lake Shore Model 218 Temperature Monitor User’s Manual
3-2
Installation
3.3 REAR PANEL DEFINITION
CAUTION:
Verify that the AC Line Voltage shown in the window on the fuse holder is appropriate
for the intended AC power input. If the voltage setting is changed, remove and verify
the proper fuse is installed before inserting the power cord and turning on the
instrument. Always turn off the instrument before making any rear panel connections.
This is especially critical when making sensor to instrument connections.
F-218-3-1.eps
1. Line Input Assembly ................................................................... Paragraph 3.3.1
2. Serial I/O and Printer Connector ................................................ Paragraph 6.2
3. Sensor Input Connector for Inputs 1–4 ...................................... Paragraph 3.3.2.1
4. Sensor Input Connector for Inputs 5–8 ...................................... Paragraph 3.3.2.1
5. Terminal Block for Relays and Analog Outputs (218S Only) ..... Paragraph 3.3.3
6. IEEE-488
INTERFACE
Connector
(218S Only) ......................... Paragraph 6.1
Figure 3-1. Model 218 Rear Panel
3.3.1 Line Input Assembly
This section describes how to properly connect the Model 218 to line power. Please follow these
instructions carefully to ensure proper operation of the instrument and the safety of operators.
F-218-3-2.eps
Figure 3-2. Line Input Assembly
Summary of Contents for 218S
Page 14: ......
