Laird WB45NBT Reference Manual Download Page 30 | Manualshive

Page: 30 / 31

background image

Laird WB45NBT

Reference Guide

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com
www.lairdtech.com/wi-fi

30

© Copyright 2016 Laird. All Rights Reserved

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0600

/sys/bus/iio/devices/iio:device0

The device(s) allows access to the raw value being read on the pin along with a scale. The product of the raw value
and the scale provides a voltage reading in microvolts.

Access the value being read on the ADC3 pin.

# cat /sys/bus/iio/devices/iio\:device0/in_voltage3_raw

948

# cat /sys/bus/iio/devices/iio\:device0/in_voltage3_scale

3222.000000

Note: 948*3222

≈

3.0 V

R

EFERENCES

http://www.iana.org/assignments/bootp-dhcp-parameters/bootp-dhcp-parameters.xml

Source-Forge (Tera Term) website:

http://en.sourceforge.jp/projects/ttssh2/releases/

Buildroot:

http://buildroot.uclibc.org/downloads/manual/manual.html#requirement

Complete information on the buildroot is located at:

http://buildroot.uclibc.org/downloads/manual/manual.html

Atmel's web site (for SAM-BA):

http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3883

Detailed Kernel Information:

https://www.kernel.org/pub/linux/kernel/people/mochel/doc/papers/ols-

2005/mochel.pdf

M

ORE INFORMATION AND

S

UPPORT

Support materials, documentation, schematics, and software for the WB45NBT are available on Laird’s support site.
Additionally, you may contact Laird’s support team from the support site as well, at

http://ews-support.lairdtech.com

.

© Copyright 2016 Laird. All Rights Reserved. Patent pending. Any information furnished by Laird and its agents is believed to be accurate and reliable. All
specifications are subject to change without notice. Responsibility for the use and application of Laird materials or products rests with the end user since
Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to non-infringement nor as to the fitness, merchantability, or
sustainability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc., or any of its affiliates or agents shall not
be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of Sale in effect
from time to time, a copy of which will be furnished upon request. When used as a tradename herein, Laird means Laird PLC or one or more subsidiaries
of Laird PLC. Laird™, Laird Technologies™, corresponding logos, and other marks are trademarks or registered trademarks of Laird. Other marks may be
the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property right.

«
...
28
29
30
31
»

Summary of Contents for WB45NBT
































Reviews:

No comments

Related manuals for WB45NBT

Brand: Razer Pages: 18

Brand: E-Lins Pages: 52

Brand: EE Pages: 207

Brand: Cerio Pages: 53

Brand: P1 Pages: 10

Brand: Arista Pages: 4

WLTMS-110_384041

Brand: Gemtek Systems Pages: 14

Brand: Billion Pages: 130

nova AX3000 EX12

Brand: Tenda Pages: 16

Brand: Tenda Pages: 72

Brand: Tenda Pages: 92

Brand: KTI Networks Pages: 101

Brand: Aruba Networks Pages: 2

Mini HF GPRS module

Brand: Intratone Pages: 6

NetGenie NG11EH

Brand: Cyberoam Pages: 16

Brand: Comtrend Corporation Pages: 92

Brand: Comtrend Corporation Pages: 88

Brand: Northbound Networks Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands