Laird AC4490, User Manual

Page: 25 / 46

AC4490 User Guide
Version 4.5
Laird Connectivity Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
25
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Parameter EEPROM
Address Length
(Bytes) Range Default Description
MAC ID 0x80 6 0x00 -
0xFF Factory programmed unique IEEE MAC
address.
Original Max
Power 0x8E 1 Set in
Production
& can vary Copy of original max power EEPROM
setting. This may be referenced but should
not be modified.
Product ID 0x90 15 0x90 - 0x93: Product ID
0x94 - 0x95: Prefix (CL, CN, or AC)
0x96 - 0x99: Power (200M,
200A, 1000,
1x1)
Note: There will be a period in front of
the 1x1 to keep the field at four bytes.
0x9A - 0x9C: Interface (232, 485 , TTL)
0x9D - 0x9E: Setup script (01 is stock)
0x9F: Reserved for future use; always 0xFF
Protocol
Status /
Receive ACK
0xC0 1 0xE3,
oxFF oxFF
oxE3 = GO0 outputs the Protocol Status
and GO1 outputs the Received
Acknowledgement signal
0xFF = Disable Protocol Status / Receive
ACK
Receive API 0xC1 1 0xE3,
0xFF 0xFF 0xE3 = Enabled
0xFF = Disabled
Enhanced API
Ctrl.
0xC6 1 0xF8 Settings are:
bit-7: Enhanced API Control Enable
0 = Enable Enhanced API Control
1 = Disable Enhanced API Control
bit-6: Laird Use Only
bit-5: Laird Use Only
bit-4: Laird Use Only
bit-3: Laird Use Only
bit-2: Send Data Complete Enable
0 = Disable
1 = Enable
bit-1: API Transmit Packet Enable
0 = Disable
1 = Enable
bit-0: Enhanced API Receive Packet Enable
0 = Disable
1 = Enable
Auto
Calibrate 0xCC 1 0xE3,
0xFF 0xFF oxE3 = Enable Auto Calibrate
0xFF = Disable Auto Calibrate
DES Key 0xD0 7 0x00 -
0xFF 56-bit Data Encryption key