Instruction LTC 11 Laing Innotech GmbH + Co. KG Althuette Germany
- 31 -
•
The display will now show P01
•
Press the “up” or “down” arrow key until the display shows P10
•
Press the “memory one” key shortly to enter the setting mode
•
The display now will show the actual setting
o
0: Metric, indication in centimeter
o
1: Imperial, indication in inch
•
Press the “up” or “down” arrow key to select the desired setting
•
Press the “memory one” key shortly to confirm the selection
Enter service menu by the “LD” control panel
For service purposes certain values and settings can be indicated in the display.
The service menu can be entered as follows:
•
Press the “up” arrow key 4 times quickly one after another
•
Reaching the program mode will be confirmed by a sound
•
The display will now show P01
•
Press the “up” or “down” arrow key until the display shows P11
•
Press the “memory one” key shortly to enter the menu.
•
The display now will show P50
•
Press the “up” or “down” arrow key to select the desired menu item
•
Once the desired menu item is reached press the “memory one” key
shortly, now the value for the selected item will be shown
•
To leave the menu item shortly press the “memory two” key
•
Menu items:
o
P50: Motor count, when selected the display shows the number of
motors the controller is configured for
o
P51: GyroSense enabled: “1”
GyroSense disabled: “0”
o
P52: OptoSense enabled: “1”
OptoSense disabled: “0”
o
P53: BlueTooth enabled: “1”
BlueTooth disabled: “0”
o
P54: WiFi enabled: “1”
WiFi disabled: “0”
o
P55: Charge state of the Battery (LTCB)
o
P56: Temperature of the Battery (LTCB)
Rest user settings
This menu allows to reset all user settings to the values set when the controller
was supplied to the customer. The following values will be reset:
- Memory position 1 to 4
- Upper user limit
- Lower user limit
- Button mode
- Collision detection
- Unit used in the display
- Precision of the indication in the display