4
2. TOOLS
Please check that you have all neccessary tools and safety equipment before installation!
Cordless drill (preferably 2pcs), drill bits (TX20-25, HEX4), ladder (2pcs), clamping screws
(2pcs), wood drill (2, 4 and 5mm), leveling tool, wrench 10mm (2pcs), wooden support bar
(4pcs with lenght of ca 3m), glass lifting suction cups (preferably 2pcs).
3. DETAILS
Numerous wooden details can be confusing at the
arrival of the greenhouse but sorting the details will
help solve the buzzle.
Remove the parts from the package and assemble the
similar parts into bundles. Follow the markings on the
details. Two parts with the same symbol will be
connected during installation.
During sorting, you get full confidence that all the
necessary details are present and without defects.
List of details
1. Back wall upper triangle (ELM-04) – 1 pc
2. Front wall upper triangle (ELM-05) – 1 pc
3. End wall post (ELM-06) – 4 pcs
4. Side wall base detail (ELM-01) – 2 pcs
5. Back wall base detail (ELM-02) – 1 pc
6. Front wall base detail (ELM-03) – 1 pc
7. Back wall inner post (ELM-12) – 2 pcs
8. Doorpost with hinges (ELM-08) – 1 pc
9. Doorpost (ELM-09) – 1 pc
10. Ridge beam (ELM-07) – 1 pc
11. Rafter (ELM-10) – 6 pcs
12. Roof window (EL-08) – 1 pc
13. Door (ELM-11) – 1 pc
14. Rafter middle detail (DET-01) – 8 pcs
15. Roof window middle detail (DET-04) – 1 pc
16. Threshold cover (MEM-01) – 1 pc
NB! Start installing the greenhouse on the foundation only after sorting the details and
thoroughly reading the installation manual.
