15
12. INSTALLATION OF RAFTERS
Place the lower end of the rafter to the intended location in base frame and upper end of the
rafter to the ridge beam metal carrier and fasten with an M6 bolt, wascher and nut. Start
installation of rafters from front wall and move toward back wall.
NB! Make sure that the edge of the carrier does not cover rafter glass groove (distance ca 2
mm) and rafter should be as against the rear wall of the carrier as possible.
NB! Tighten the nuts only later after installing the rafter middle details!
(Look section 13)
[[
(/0
(/0
(/0
(/
0
(/
0
(/
0
0[
