26
Place the glass to correct position.
Hold the glass in place and drill holes with a depth of 30 mm.
Fasten the glass with a glass screw.
Do not over tighten screws!
NB! Start installation of back wall glass from top (OKM-01). It is easier to align these
smaller glasses according to drawing and these will be starting point for installing other
glasses.
NB! Make sure that the glasses are evenly spaced and that the attachment points line up.
Observe the alignment of the glasses at their lower edge. The lower edge of the back wall
glass must be 50 mm from base frame elements gap and line up with side glass lower edge.
