10HP
Stationary
Dust
Cyclone
Manual
14
GENERAL TOOL ASSEMBLY
This step requires two adults. This 10HP Stationary
Dust Cyclone is heavy, be careful when lifting and handling it! Failure to
comply may cause serious injury and/or damage to the machine and/or
property!
Tools Required
10mm wrench / 12mm wrench / 14mm wrench
Phillips screwdriver
4mm hex wrench / 5mm hex wrench
To assemble your dust cyclone, follow these steps:
For your own safety, do not connect the machine to the power source until
the machine is completely assembled. Please also make sure that you read
and understand the entire instruction manual.
ASSEMBLY TIME ESTIMATE
1 hour to 2 hour
Step One: Use a forklift to lift the unit up by using a chain and hooking on
end of the chain to the right top eye bolt; and the other side to the left top
eye bolt. Slowly lift the unit up to a height where you will be able to
assemble the lower upright supports.
