10HP
Stationary
Dust
Cyclone
Manual
15
Step Two: Secure the (2) lower upright supports to the right side of the machine
when facing the control panel. These two lower upright supports have a one dot
marking on the side rim, as shown below. Use (4) 3/8”*1” hex bolts and (8)
3/8”*OD23*2t flat washers and (8) 3/8” lock nuts for the two side bolt holes.
Step Three:
Secure the (2) lower upright supports to the right side of the
machine when facing the control panel. These two lower upright supports have a
two dot marking on the side rim, as shown below. Use (4) 3/8”*1” hex bolts and
(8) 3/8”*OD23*2t flat washers and (8) 3/8” lock nuts for the two side bolt holes
and use (1) M16*50mm hex bolt for the center bolt.
