laguna Smart Shop M2, Owner'S Manual

Page: 56 / 75

Smart Shop "M" Maker 2 - 3 Phase Power 56
Understanding Work Coordinate Systems
Machine Coordinates (Workpiece 0).
Coordinates based off of the home switches, not the origin.
Tool positions and TTO switch location are set relative to machine coordinates.
Press
“MENU + ZRN/0” to switch to “Workpiece 0”.
Hold down the MENU + 1-9 Buttons to move between different origin points.
(This Machine can have up to 9 Origin Points on the Handheld at the same time).
In the picture below the Active Work Coordinate System is "Workpiece 2“.
Transitioning between workpieces will, in turn transition between X, Y, and Z offsets made in each Workpiece.