laguna Smart Shop M2, Owner'S Manual

Page: 13 / 75

Smart Shop "M" Maker 2 13
THE MACHINE WITH
RESPECT AND CAUTION WILL CONSIDERABLY LESSEN THE POSSIBILITY OF PERSONAL INJURY.
HOWEVER, IF NORMAL
SAFETY PRECAUTIONS ARE OVERLOOKED OR IGNORED, PERSONAL INJURY TO THE OPERATOR MAY
RESULT. SAFETY
EQUIPMENT SUCH AS GUARDS, PUSH STICKS, HOLD-DOWNS, FEATHER BOARDS, GOGGLES, DUST
MASKS AND HEARING
PROTECTION CAN REDUCE YOUR POTENTIAL FOR INJURY. BUT EVEN THE BEST GUARD WON’T MAKE UP
FOR POOR
JUDGMENT, CARELESSNESS OR INATTENTION. ALWAYS USE COMMON SENSE AND EXERCISE CAUTION
IN THE WORKSHOP.
IF A PROCEDURE FEELS DANGEROUS, DON’T TRY IT. FIGURE OUT AN ALTERNATIVE PROCEDURE THAT
FEELS SAFER.
REMEMBER: YOUR PERSONAL SAFETY IS YOUR RESPONSIBILITY.
OWNER’S MANUAL . READ AND UNDERSTAND THIS OWNER’S MANUAL BEFORE USING MACHINE.
TRAINED OPERATORS ONLY . UNTRAINED OPERATORS HAVE A HIGHER RISK OF BEING HURT OR KILLED.
ONLY ALLOW
TRAINED/SUPERVISED PEOPLE TO USE THIS MACHINE . WHEN MACHINE IS NOT BEING USED, DIS-
CONNECT POWER,
REMOVE SWITCH KEYS, OR LOCK-OUT MACHINE TO PREVENT UNAUTHORIZED USE—ESPECIALLY
AROUND CHILDREN. MAKE
YOUR WORKSHOP KID PROOF!
DANGEROUS ENVIRONMENTS . DO NOT USE MACHINERY IN AREAS THAT ARE WET, CLUTTERED, OR
HAVE POOR LIGHTING.
OPERATING MACHINERY IN THESE AREAS GREATLY INCREASES THE RISK OF ACCIDENTS AND INJURY.
MENTAL ALERTNESS REQUIRED . FULL MENTAL ALERTNESS IS REQUIRED FOR SAFE OPERATION OF
MACHINERY. NEVER
OPERATE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL, WHEN TIRED, OR WHEN DISTRACTED.
ELECTRICAL EQUIPMENT INJURY RISKS . YOU CAN BE SHOCKED, BURNED, OR KILLED BY TOUCHING
LIVE ELECTRICAL
COMPONENTS OR IMPROPERLY GROUNDED MACHINERY. TO REDUCE THIS RISK, ONLY ALLOW
QUALIFIED SERVICE
PERSONNEL TO DO ELECTRICAL INSTALLATION OR REPAIR WORK, AND ALWAYS DISCONNECT POWER
BEFORE ACCESSING
OR EXPOSING ELECTRICAL EQUIPMENT.
DISCONNECT POWER FIRST . ALWAYS DISCONNECT MACHINE FROM POWER SUPPLY BEFORE MAKING
ADJUSTMENTS,
CHANGING TOOLING, OR SERVICING MACHINE. THIS PREVENTS AN INJURY RISK FROM UNINTENDED
START-UP OR
CONTACT WITH LIVE ELECTRICAL COMPONENTS.
EYE PROTECTION . ALWAYS WEAR ANSI-APPROVED SAFETY GLASSES OR A FACE SHIELD WHEN
OPERATING OR OBSERVING