laguna Smart Shop M2, Owner'S Manual

Page: 15 / 75

Smart Shop "M" Maker 2 15
DESIGNED.
NEVER STAND ON MACHINE . SERIOUS INJURY MAY OCCUR IF MACHINE IS TIPPED OR IF THE CUTTING
TOOL IS
UNINTENTIONALLY CONTACTED.
STABLE MACHINE . UNEXPECTED MOVEMENT DURING OPERATION GREATLY INCREASES RISK OF
INJURY OR LOSS OF
CONTROL. BEFORE STARTING, VERIFY MACHINE IS STABLE AND MOBILE BASE (IF USED) IS LOCKED.
USE RECOMMENDED ACCESSORIES . CONSULT THIS OWNER’S MANUAL OR THE MANUFACTURER FOR
RECOMMENDED
ACCESSORIES. USING IMPROPER ACCESSORIES WILL INCREASE THE RISK OF SERIOUS INJURY.
UNATTENDED OPERATION. TO REDUCE THE RISK OF ACCIDENTAL INJURY, TURN MACHINE OFF AND
ENSURE ALL MOVING
PARTS COMPLETELY STOP BEFORE WALKING AWAY. NEVER LEAVE MACHINE RUNNING WHILE
UNATTENDED.
MAINTAIN WITH CARE . FOLLOW ALL MAINTENANCE INSTRUCTIONS AND LUBRICATION SCHEDULES TO
KEEP MACHINE IN
GOOD WORKING CONDITION. A MACHINE THAT IS IMPROPERLY MAINTAINED COULD MALFUNCTION,
LEADING TO SERIOUS
PERSONAL INJURY OR DEATH.
DAMAGED PARTS . REGULARLY INSPECT MACHINE FOR DAMAGED, LOOSE, OR WRONGLY ADJUSTED
PARTS—OR ANY
CONDITION THAT COULD AFFECT SAFE OPERATION. IMMEDIATELY REPAIR/REPLACE BEFORE
OPERATING MACHINE. FOR
YOUR OWN SAFETY, DO NOT OPERATE MACHINE WITH DAMAGED PARTS!
MAINTAIN POWER CORDS . WHEN DISCONNECTING CORD-CONNECTED MACHINES FROM POWER, GRAB
AND PULL THE
PLUG—NOT THE CORD. PULLING THE CORD MAY DAMAGE THE WIRES INSIDE. DO NOT HANDLE
CORD/PLUG WITH WET
HANDS. AVOID CORD DAMAGE BY KEEPING IT AWAY FROM HEATED SURFACES, HIGH TRAFFIC AREAS,
HARSH CHEMICALS,
AND WET/DAMP LOCATIONS.