laguna PX-16 SHEARTEC II, Owner'S Manual

Page: 18 / 56

PX-16 SHEARTEC II PLANER 18
Fig. A.) The tool has a grounding plug that looks like the plug illustrated in Fig A.) A temporary adapter, which
looks like the adapter illustrated in Fig B may be used to connect this plug to a 2 Pole receptacle as shown in Fig.
B.) if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician. This adapter is not permitted in Canada. The
green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box.
3.) Grounded, Cord-Connected tools intended for use on a supply circuit having a nominal rating
between 150 – 250 volts, inclusive:
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in
Fig. C. The tool has a grounding plug that looks like the plug illustrated in Fig. C. Make sure the tool is
connected to an outlet having the same configuration as the plug.
No adapter is available or should be used
with this tool. If the tool must be reconnected for use on a different type of electric circuit, the reconnection should
be made by qualified service personnel; and after reconnection, the tool should comply with all local codes and
ordinances.
EXTENSION CORDS ARE NOT RECOMMENDED. If the customer needs to use an extension
cord, the Extension Cord must be qualified to fall within Local Electrical Code (USA, CSA, etc.). If the
customer utilizes an Extension Cord that does not fall within Code and causes damage to machine, the
Warranty will be Voided.